Skip to Content
Home » Reheat » How To Reheat Taco Bell – The 4 Best Ways

How To Reheat Taco Bell – The 4 Best Ways

Taco Bell tacos make for a rich and delicious meal, so much that it’s common to order more than your fill and end up with leftovers that you really don’t want to throw away.

Luckily, reheating Taco Bell tacos is fairly easy, and by following our guide on how to reheat tacos, you can make the best out of your leftover Taco Bell.

What is the best way to reheat Taco Bell? The best way to reheat Taco Bell is to use an oven or a grill, but you could also use a pan on the stove.

The quickest way to reheat Taco Bell is the microwave, but you’ll have to use a few tricks to end up with great results.

The Best Ways To Reheat Taco Bell

Reheating Taco Bell isn’t a hard task, but there are still a few tips and tricks you should know if you want to get a really delicious meal out of your leftovers.

First of all, before reheating Taco Bell tacos you need to know how to store+ your leftovers, in order to set the stage for the best possible outcome.

The best thing you can do is to store your leftovers in an airtight container, and separately wrap salsa and sour cream if you still have some.

Remember to eat the leftovers within the next two days if you keep them in the fridge, because afterward, they may not be safe to eat.

Another really great tip is to just separate all the ingredients in the taco and reheat them in groups, according to the best way to reheat each.

This might sound like a lot of work, and obviously, it isn’t as easy as just reheating the whole taco in a microwave, but can give you the best results.

We’re going to talk about this more in detail as we go over each method, but the main thing is that you can remove fresh ingredients and toppings from your Taco Bell taco, remove meat and beans, and just reheat the taco shells.

Once you’ve reheated them, you can add back all the ingredients that should be hot, and reheat them too for a while more.

After that, it’s just a matter of adding back all the fresh ingredients, too.

This is the best method if you’re trying to reheat hard tacos, if you have soft tacos you could just leave the ingredients in and warm them with one of the methods we’re explaining below.

In the case of burritos, removing the fresh ingredients and warming up everything else is the best choice when you want to reheat a taco bell burrito.

Specifically, separating the ingredients works pretty well when you want to reheat a taco bell bean burrito.

There are a few different methods to reheat Taco Bell leftovers, and choosing the best one depends mostly on your specific needs.

We have put together a handy guide to help you choose the best method to reheat Taco Bell so that you can follow our tips and tricks to get the perfect meal out of your leftovers.

How to reheat Taco Bell in an oven

The first method you can use is to reheat Taco Bell tacos in the oven, and this is the best way for the taco shell to retain its good texture even when reheated.

As we’ve mentioned before, the best way to do this is to remove all of the fillings from your taco, since some of the ingredients include lettuce, tomatoes, sour cream… all ingredients you really don’t want to reheat.

Once you’ve removed the cold ingredients, you should also remove beans and meat, since these need to be reheated but it’s much better to reheat them on their own.

Remove as many ingredients as you can, and then wrap the taco shell with aluminum foil and place it in an oven-safe dish.

While the shells are reheating, you can add meat and beans into a pan, or even toss them in the microwave.

The last step is to put everything together and enjoy your Taco Bell taco!

This method works best if you’re trying to reheat hard shell tacos since it’s the best way to maintain the texture of the hard shell.

Here are the steps to reheat Taco Bell in an oven:

  1. Remove all the cold ingredients.
  2. Remove beans and meat.
  3. Preheat your oven to 400°F.
  4. Choose an oven-safe dish.
  5. Wrap taco shells in aluminum foil.
  6. Reheat the Taco Bell shell for 15 to 20 minutes.
  7. Reheat meat and beans in a pan or in the microwave.
  8. When everything is reheated, put all the ingredients together.
  9. Serve and enjoy.

How to reheat Taco Bell on a stove

The second method you can use is to reheat Taco Bell tacos on a stove, using a non-stick pan or a skillet. With this method, you can reheat both hard and soft tacos.

Once again, the first thing you should do is to remove all fresh or cold ingredients, like grated cheese and guacamole, and then put meat and beans in a separate pan.

You can reheat the meat with the beans in another pan, or you can even use the microwave.

It’s important to reheat meat and beans because sometimes bacteria can stick to uncooked meat.

Add a bit of oil to the pan or the skillet, so that your Taco Bell tacos don’t end up sticking to the surface, and then reheat one side and flip over.

You could also cover the pan with a lid so that the heat can circulate around the taco to evenly reheat it.

Keep an eye on the pan because you don’t want your tacos to accidentally burn.

Once everything is reheated, put back the filling and enjoy your Taco Bell leftovers!

Here are the steps to reheat Taco Bell on a stove:

  1. Choose a non-stick pan or a skillet.
  2. Remove all fresh ingredients, meat, and beans from your Taco Bell tacos.
  3. Add a little bit of oil to coat the pan.
  4. Add the taco shells and close the lid.
  5. Reheat for a few minutes, then flip them over.
  6. Reheat meat and beans in another pan or in the microwave.
  7. Put everything together and serve.

How to reheat Taco Bell on a grill

Now, this is one of the methods that work better when you want to reheat soft tacos: using a grill to reheat your Taco Bell tacos will give them a nice smoky flavor, and it’s also one of the easiest methods you could use!

If you’re reheating soft tacos, there’s no need to remove any ingredients other than the fresh ones: the beans and the meat will reheat nicely on the grill, so you don’t have to warm them separately.

Before adding your Taco Bell tacos to the grill, make sure you’ve wrapped them nicely in aluminum foil: this will make sure all the ingredients stay in the tacos, and will also keep your grill nice and clean.

Less work for you!

Here are the steps to reheat Taco Bell on a grill:

  1. Remove cold ingredients and set aside.
  2. Wrap your tacos in aluminum foil.
  3. Put them on the grill.
  4. Close the lid and set the grill on high heat.
  5. Reheat for 5-8 minutes.
  6. Remove, add back the fresh ingredients, and serve.

How to reheat Taco Bell in a microwave

Reheating Taco Bell tacos in the microwave is definitely the quickest and fastest method, but you have to keep in mind that you won’t get the same excellent results that you would get using one of the other methods.

Removing all the cold or fresh ingredients from your taco and putting them aside for later is a fundamental step when reheating tacos with the microwave as well.

The main problem when using a standard microwave to reheat Taco Bell tacos is that the taco shells can end up being extremely soggy if you don’t do anything to prevent that.

To avoid this result when you don’t have an inverter microwave, you can place a wet paper towel or a wet paper cloth on top of the microwave-safe bowl where you’re going to put your tacos so that the microwave drains the moisture from the cloth.

To reheat taco meat, it would be better to cook it separately on the stove instead of the microwave, but you can also reheat it quickly in the microwave if you’re in a rush.

When everything is warmed up and ready, you can put the taco back together and enjoy it.

Here are the steps to reheat Taco Bell in a microwave:

  1. Choose a microwave-safe dish.
  2. Remove cold ingredients and set aside.
  3. Remove meat and beans.
  4. Place Taco Bell taco in the dish.
  5. Place a wet paper towel or a wet paper cloth on top.
  6. Reheat for 30 seconds.
  7. Check the temperature.
  8. Reheat for another 30 seconds if still cold.
  9. Reheat the beans and the meat.
  10. Remove, add back the fresh ingredients, and serve.

Can you reheat Taco Bell?

Yes, you can reheat Taco Bell leftovers, which often look too good to be thrown away.

You can get the best results if you store them properly and if you spend a little time reheating the ingredients separately.

The best way to reheat Taco Bell tacos is to use an oven, and this works especially well if you have hard shell tacos.

It’s the perfect method to achieve all the crispiness you want from your tacos, and it’s also a pretty efficient method.

Reheating Taco Bell tacos on the stove works great for both hard and soft tacos: it’s a great method because it doesn’t require a lot of work, but it still gives you amazing results!

Another great method is to reheat Taco Bell on a grill, and this works great when you want to reheat soft tacos.

The best thing about this method is that it’s super easy, and you don’t have to put in a lot of work to achieve a great outcome.

If you’re looking to reheat Taco Bell quickly and easily, you can use the microwave.

Although this method is super quick, you will most likely not restore your Taco Bell to the original freshness and crispiness.

It’s always a waste to throw food away, so make sure to follow our reheating guides closely to make the best out of your leftovers for days to come.

Do you like this recipe or these cooking tips?

Click on a star to rate it!

Average rating 4.4 / 5. Vote count: 10

No votes so far! Be the first to rate this post.

Passionate chef, in love with everything related to food and cooking it to perfection!
Michael Cook
Latest posts by Michael Cook (see all)
(Visited 2,571 times, 1 visits today)
DMCA.com Protection Status